Services
- Home
- Products
- Services
|
Customer
|
Type of Reed
|
Qty
|
Reed Count
|
Dent Thickness
|
Airspace
|
Total Length
|
Total Height
|
|---|---|---|---|---|---|---|---|
|
-----
|
Loom Type
|
1
|
DT / 2 inch
|
mm
|
%
|
TL
|
TH
|
|
DLC
|
DLC MM
|
Top Profile
|
Bottom Profile
|
Start Dent
|
End Dent
|
Useful Length
|
Useful Height
|
|---|---|---|---|---|---|---|---|
|
Flat + Profile
|
in mm
|
TH 2
|
TH 1
|
A 1
|
A 2
|
UL
|
UH
|
|
Extra spring top
|
Extra Spring bottom
|
Conical
|
Conical Length
|
Airflow in
|
Channel Height
|
Total No. of Dents
|
Dent quality
|
|---|---|---|---|---|---|---|---|
|
YES/ NO
|
YES/ NO
|
YES/ NO
|
mm
|
Kgf / Bar
|
CH
|
Nos.
|
SUS 420 / 301
|
Features
Profile Reeds available all type of Airjet looms
Available count range from 20 count to 160 counts
Flat Reeds available for Rapier and Projectile looms
Available count range from 20 count to 200 counts
Special Reeds for Technical Textiles Loom
Reeds available with variable density
Profile Reeds available with SUS 420 and SUS 301 material grade
Profile Reeds available with Normal DLC & Extra Hard DLC (Star DLC)
Star Heald wires available in all sizes for all type Airjet looms
Fabric Inspection Machines can be manufactured on request
Reed storage rack can be supplied for all types of Reeds
After sales services ad repairing available on loom and off loom
Before
After
Before
After
Before
After
REED REPAIR & MAINTENANCE
REMOVAL OF GROOVE FORMATIONS
In case of reed groove formations, we can offer a repair service so that customer can use the same reed with new replaced dents.
Available service until 26 DT/CM (132DT/2" )
Available service only for airjet reeds.
REMOVAL OF DAMAGED DENTS
In case of damaged profile dents due to accident, groove formation or weft detectors going through the reed, we can take off the damaged dents, with this service customer can reuse the same reed without the damaged dents.
Available service until 26 DT/CM (132DT/2" )
Available service only for airjet reeds
ADDING EXTRA SPRINGS
This service is used by customer where more dent stability is required for already purchased reeds. By adding extra springs on top and/or bottom, a higher dent stability will be achieved. Therefore during the fabric formation, less vibrations will be transmitted to the reed-dents.
OTHER SERVICES
Non – Conical to Conical Reeds (2 color to 4 color)
Addition of Extra DLC Wherever required in the reed
Count change possible (+/- 2 count up and Down)
Change of Aluminum profiles
Airflow recalibration
Ultrasonic Cleaning